Ferrari, Lamborghini, Rolls-Royce and race cars display at American Le Mans Series "Festival of Speed" at World Financial Center Winter Garden.
Display of 25 exotic cars including Ferrari, Lamborghini, Rolls-Royce and others to celebrate the American LeMans Series upcoming Connecticut Race at Limerock. Race car drivers attending
NEW...
How to Plan a Car Show Extravaganza and Fundraiser
A car show "extravaganza" is a fantastic opportunity to bring a community or special interest group together – for more than one cause. Planning your car show event is not an easy task but the process can be simplified and efficient. The most...
Motorcycle Laws in California
Safety Helmet
Safety Helmets are required by law when you ride in california
highways. You can be cited for not wearing safety helmets on any
motorcycle that are up and above 49cc
Eye Protection
Eye Protection is not yet...
Tips On Shipping Your Motorcycle
There are quite a few differences between car and motorcycle
shipping. While a car has a reliable handbrake and four wheels
for extra stability a motorcycle is quite different by design
having only two wheels amd nothing to keep the bike...
How to Replace Motorcycle Grips
Riders can easily be bored by the look, design and feel of their motorcycle parts and gears. New look excites them. It also gives them a different hype. This is the reason why they keep on changing them from time to time.
Most, if not all of the riders know how to repair or maintain their motorcycles. Changing tires, fixing the stand up to its cleaning, washing and waxing - you bet, seasoned riders knew it!
Some of them are learning it in an easy manner like for instance in a course or through a peer or another rider. But no matter how they acquire their knowledge the fact is that said knowledge will always redound to their advantage.
There are some parts that are easy to replace. Grips, for instance are good example. It only involves few steps and here they are:
1.Ready your new grips, rubbing alcohol, hammer, socket and WD-40.
2.Remove the bar end. Be careful with its head and threads. If they are already damaged, better replace them also.
3.Pull the end of the grip and spray on the WD-40 to loosen the
contact. You can remove the grips by twisting and folding its inner edge. Remember where the original location of the inner edge.
4.After the grip has been pulled, clean the handle with rubbing alcohol. Be sure to remove the glue from the Clip-on. Also, lubricate the Clip-on with rubbing alcohol and slide the new grip. While sliding it, do some twisting techniques. Do this while the alcohol has not yet evaporated otherwise it will be harder to twist.
If the new grip material will allow, you can also use oil instead of alcohol.
5.To tap the new grip into position, use the hammer and socket. Make sure that it fits well and will not impair the bike's operation. To test it, roll the throttle to full-on and let it snap back. You can ride around to be used to its stiffness.
Finally, you can enjoy your bike's new look and new grip! About the Author
Please visit http://www.aftermarketmotorcyclepartsnow.com for Comments and Inquiries regarding this article.
![[Image] Hellsgates](http://image4.bikerornot.com/usrimg/11061r.jpg "Hellsgates")
